12 BRANDS · ONE GROUP · EVERY STAGE OF THE PIPING JOB
FROM THE FIRST CUT TO THE FINAL FACE
S.F.E. Group brings the pipe stand, the cutter, the purge bag, the welding head and the flange facer under one roof — so your turnaround runs on one call, not six.
WHO WE ARE
ONE GROUP, TWELVE BRANDS, ONE PATH
S.F.E. Group was formed in 2019 from three leading pipe-fabrication OEMs and has since added Axxair, Magnatech, Climax and Sumner. Today the group carries over 200 years of combined engineering experience across 12 complementary brands, with offices and warehousing on five continents and 500+ partners and distributors worldwide — covering every stage of a piping job, start to finish.
STAGE 2 OF 5
Handle & Position
Before a torch or a weld head ever touches the pipe, it has to be lifted, rolled, staged and held steady. BB-SUMNER and Sumner Material Lifts cover the stand, the roller, the buggy and the hoist so the pipe is exactly where the crew needs it, safely.
Heavy Duty Pro-Jack
up to 12" pipe · 2,500 lb
Fixed-leg pipe jack line (Hi/Lo/Stubby) with quick-lock height adjustment and a 2:1 certified safety ratio.
Fat Jack™ Maxi
up to 36" pipe · 6,000 lb
Folding-leg heavy-capacity jack with double locking pins for the largest diameters on site.
Pro Adjust-A-Roll™
2 - 48" pipe · 5,290 lb
Quick-change roller stand for layout, fit-up and welding rotation, with locking casters.
Mega Roller Stand
up to 60" pipe · up to 15,000 lb
Heavy-duty rotation stand for large-bore vessel and pipe work, short or tall.
STAGE 2 OF 5
Cut & Beavel
Before a torch or a weld head ever touches the pipe, it has to be lifted, rolled, staged and held steady. BB-SUMNER and Sumner Material Lifts cover the stand, the roller, the buggy and the hoist so the pipe is exactly where the crew needs it, safely.
Axxair Orbital Cutting
2 - 48" pipe · 5,290 lb
Orbital cutting, bevelling and squaring machines for stainless, titanium, duplex and nickel alloys.
PREP Portable Bevelling
1 - 24" i/d (TAG / H&S Tool)
Portable pipe bevel machines for field prep, plus splitframe clamshell machines up to 120".
E-Z Pipecut Manual
4.5 - 24" pipe
Chain-driven manual pipe cutter with variable bevel angles up to 45° and a quick-release clutch.
STAGE 3 OF 5
Fit-up & Purge
Fit-Up Pro and Mathey Dearman hold the joint square and aligned; Pipe Purge Masters (PPM) seals the weld chamber and monitors oxygen so the weld comes out clean, every time — especially critical on stainless and alloy piping.
Purge Oxygen Monitor
ppm-level readout
Real-time oxygen monitoring to confirm purge quality before and during welding.
Purge Bag System
2 - 24" pipe
Dual inflatable dam purge system with armored connecting tube for a sealed, reusable weld chamber.
Ultra Clamps
1 - 14" o/d
ACME-thread alignment clamps for pipe-to-pipe, pipe-to-elbow and pipe-to-flange fit-up.
STAGE 4 OF 5
WELD
Magnatech and Axxair auto-program orbital GTAW, FCAW and GMAW welds so consistent, repeatable results don’t depend on finding a specialist welder for every pass.
Axxair SATFX / SATO Heads
0.25 - 8.265" o/d
Closed and open orbital GTAW heads for prefabrication and small-to-mid diameter tube welding.
Pipeliner Pro 616
controller + weld head
Multi-level controlled orbital pipeline welding system built for repeatable field welds.
T-Head 419
4.5 - 84" pipe
Multi-pass orbital GTAW weld head for pipe-to-pipe and pipe-to-fitting welding on carbon and exotic alloys.
STAGE 5 OF 5
Face the flange
Climax closes out the job with I/D and O/D mount flange facing, line boring and portable machining, with Bortech bore welding on hand to restore worn surfaces before final machining.
Bortech Bore Welding
BW1000 - BW5000
Automated bore welding to rebuild worn diameters and sealing surfaces ahead of final facing.
O/D Mount Flange Facer
external mount
External-mount facing for flanges where internal access is limited.
I/D Mount Flange Facer
internal mount
Restores flange face flatness and finish in place, without breaking the line down further.