HM14LC, HydraMax Hydraulic Topside Bolt Tensioners, M72 - M90 Maximum Thread Range

Enerpac HM14LC is a high-performance load cell from the HydraMax series of hydraulic topside bolt tensioners, designed for precise, uniform tensioning of large-diameter bolts (M72–M90) on standard flanges such as ANSI, API, and Norsok L005 compact flanges. Delivering 30% greater load capacity than conventional tensioners, this model incorporates a long 15 mm stroke for fewer cycles, over-stroke protection via relief valve, and a quick-release bridge for rapid setup, ensuring safe, efficient bolting at up to 1500 bar with features like misalignment compensation (±5°), captive sockets to prevent dropped parts, and anti-slip grips, ideal for oil & gas, power, and heavy industrial maintenance.

• Model: HM14LC (HydraMax Hydraulic Topside Bolt Tensioner Load Cell)
• Thread Range: M72–M90 (3"–3 1/2")
• Maximum Operating Pressure: 1500 bar (21,750 psi)
• Load Capacity: 358 tons (~3,517 kN)
• Stroke: 15 mm (0.59 in.)
• Hydraulic Pressure Area: 23,451 mm² (36.35 in²)
• Minimum Socket Rotation: 60°
• Weight (Load Cell Only): 28.5 kg (62.8 lb.); full assembly with adapter/bridge kit: 18.5–22 kg (40.8–48.5 lb.) depending on configuration
• Dimensions (Typical with Adapter/Bridge; varies by config, in inches): Overall Height (A): 8.1–8.5; Body Diameter (B): 7.2–7.8; Piston Diameter (C): 3.5–3.9; Overall Length (D): 11.2–12.6; Bridge Width (E): 3.8–4.0; Reaction Arm Length (F): 4.2–4.4; Stud Protrusion Required (N): 12.5–12.9; Nearest Obstruction (X min.): 1.8–2.1
• Connectivity: Twin hydraulic ports for multi-tool linking; requires ultra-high-pressure fittings/hoses
• Features: Long-stroke capability with over-stroke relief valve and spring return; quick-release bridge; visible stroke indicator; captive socket to prevent falling objects; interchangeable adapter kits; anti-slip grip; tommy bar included
• Operator Feedback: Stroke indicator for cycle monitoring; ergonomic design for reduced fatigue
• Maintenance Features: Self-energizing seals; corrosion-resistant construction; annual inspection of seals/hoses recommended; compliant with Machine Directive 2006/42/EC, ASME B30.1, EN-ISO 4413:2010, EN-ISO 12100:2010
• Additional Features: 30% higher load vs. conventional tensioners; suitable for ANSI/API/Norsok L005 flanges; ATEX options available; load cells ordered separately from adapters/bridges for flexibility